pure maintenance mold remediation orlando official logo
pure maintenance mold remediation orlando official logo
GET HELP NOW

HVAC Duct Cleaning

Jacksonville Beach, Florida

Improving HVAC Coil and Duct Cleaning Standards with Dry Fogging that Disinfect the interior of ductwork systems of  Molds, Bacteria, and Viruses

Cleaning of HVAC Coils and Ducts.

We can help you improve your indoor air quality and boost your blower and compressor’s energy efficiency by addressing the hard-to-reach surfaces inside the branches and trunk line of your HVAC system. Our services are cost-effective and efficient.

We clean HVAC systems in six steps:

  1. We use high-pressure air to loosen dirt from AC and furnace coils and vacuum it off.
  2. High-pressure air is blown through trunk lines and branches to loosen remaining dirt, which is then vacuumed out.
  3. We scrub and rinse return air vents, HVAC vents, and louvers.
  4. We apply a special chemical to eliminate dust particles and brush off any remaining dirt on the HVAC coils.
  5. A camera is used to show you the completed work.
  6. Our patented two-step process dry fogs the system for optimal air quality.

Dry Fog Patented Two-Step Process

We're the only ones in Seminole and Orange Counties who offer Pure Maintenance's patented dry fog process for HVAC cleaning. It's faster and longer-lasting than other methods, and gets rid of airborne contaminants that can make you sick. This is great for people with allergies or who get sick a lot.

Mold can spread through the air and HVAC systems, affecting the air quality of your entire property. We offer a comprehensive solution that disinfects every surface with a hospital-grade sterilant and antimicrobial coating. Our patented dry fog process is proven to reduce mold spore count for at least 90 days after treatment, promoting occupant health and safety.

For Residential Customers

We offer mold removal, remediation, and restoration services for residential customers at prices ranging from $.99 to $3.99 per square foot, depending on the work required.  

For Commercial Customers

For bigger commercial, industrial, or government buildings, we provide volume discounts based on the square footage. Contact us for a free estimate and find out why we offer the best value. References are available upon request.

Testing Air Quality​

We offer air quality testing to evaluate the effectiveness of our HVAC cleaning services. Our tests measure levels of contaminants like mold, bacteria, pollen, and dust mites before and after our duct cleaning. This helps you assess the quality of air you breathe and the impact of our services.

Our air quality testing service is priced at $199 per test. We collect air samples and have them analyzed by certified third-party labs. Within three days, we'll receive a detailed report of any harmful contaminants in your air, which we'll review with you.  Two to three tests are necessary for a proper cerrtified mold assessment.

A Higher Level of
HVAC Cleaning

  • Everything the Competition Does
  • Plus Dry Fog Sterilization and Antimicrobial
We don't just "sweep" your HVAC, but 1) sterilize the entire interior, and 2) apply an antimicrobial coating to the entire interior of the system. Our antimicrobial kills mold, bacteria, and viruses for 90+ days after we leave!
SMSTransactional
SMSMarketing
Reply STOP to opt-out at any time. See our privacy policy and terms & conditions for more detail.

Why Pure Maintenance is Your Best Choice

Customers choose Pure Maintenance because there isn't a more thorough mold remediation process in Orlando, or anywhere on the planet.

We do everything that a traditional remediation and water damage restoration company offers. In addition, we are the only mold company that offers a patented and green dry fog system that uses a hospital-grade sterilant and an antimicrobial registered with the FDA. Simultaneously more effective, faster, safer, and lower cost. This is how Pure Maintenance has been able to grow nationwide to over a hundred locations and serve more than 20,000 customers in the last three years alone.

We tell people you should always at least get an estimate. The savings can be Tens of Thousands for our commercial customers and thousands of dollars for our residential customers.

The Pure Maintenance approach to mold remediation is at least 10X, most often 100X, and sometimes 1000X more effective than other mold remediation companies' approaches.  Our Dry Fog particles are smaller than a mold spore.  So wherever a mold spore goes, our dry fog will go; into the threads of carpets and drapes, and into the fabric and grain of furniture and wood. Going where no liquid can.

Sounds too good to be true?

Take for example a 2000 sq ft home that has a combined 20 sq ft of visible and hidden black mold.  Traditionally, mold removal would quarantine the immediate area around that 20 sq ft, and maybe another 80 sq ft surrounding it as well.  Then treat only that part of the home. This makes sense, right? Yes, it does, and we will do the same if demolition in the immediate area is necessary.

However, where we are different is we will push dry fog to every surface on every piece of furniture, carpet thread, HVAC interior, and other belonging in your entire home. Not just the 2,000 sq ft of floor area, but to every surface. Instead of focusing only on100 sq ft, we treat the volume of the air in your home and literally treat 10,000 sq ft or more of surface area... twice.  First with our hospital-grade cold sterilant, then a second time with a preventive antimicrobial, which provides 90 days of ongoing “cleaning” and prevention.

Our claim that we are 100X more effective is a conservative estimate.

Why does going above and beyond in this way matter? Orlando is humid, very humid. Mold spores and their mycotoxins can also travel throughout the interior, very quickly.  We eliminate the risk of those spores getting hold in another poorly ventilated part of your home. A total home cleanse also immediately puts your home at a healthier level than it has likely ever been. Even more sanitary than when it was very first built.

Your improved health will thank you. Nothing else in the market can compare!

Upon request, we will share proof of being bonded and insured up to one million dollars. We will also share our Florida State certifications to perform a mold assessment and mold remediation. When looking to get quotes for your home or business mold remediation project, these three items should be considered bare minimum requirements.

An independent, inspection-only company can cost you up to $600 for the inspection and tests alone.  When necessary, this expense can't be avoided. But there are plenty of times when it is unnecessary.  We will guide you and let you know when it would be in your interest to assume or avoid this potentially unnecessary cost.

Our unique and exclusive patented process can also reduce reconstruction costs and the labor associated with demolition.

Don't want to pay anything at all for your mold removal project?

Well, we provide expert assistance and connections with public adjusters to ensure you recoup as much of the cost of your mold remediation project as possible through your home insurance company.

Time is money.

If you decide to move forward with our mold remediation services, we can achieve equal or better results than you could with another method, and do it in a fraction of the time.  The national average is close to a week's worth of inconvenience.  Our average total time in your home may span a couple of days, but the combined time in your home is less than one work day.

Our dry fog is completely proven. Your indoor air will match or be better than your outdoor air quality, or we will come back and dry fog again at no cost.

We use a third-party lab to verify your air quality by taking air samples (mold tests) after we have completed your mold remediation project. One air quality test is taken outside your home, and the other is taken inside your home.  We can then easily compare the results to show you that your indoor air has been restored to as good or better than outdoor quality.

More importantly, we look to address the air quality throughout your entire home, not just the air quality local to where the mold growth was found.

A Lower-Cost Way to
Improve Occupant Health

Our HVAC cleaning services can greatly improve the air quality in your building, reducing respiratory issues and eliminating odors. Prices vary depending on the size of your system, ranging from a few hundred to a few thousand dollars for residential and commercial systems. Choose our Total Building Cleaning services for a healthier environment for all occupants.

us army corps of engineers

Antimicrobial Dry Fog

Our dry fog process was tested by the Army Corps of Engineers and proven to prevent mold growth and improve air quality for up to 90 days after treatment. Choose our innovative solution for long-lasting benefits to your property.

Environmental Probiotics

Our NG-5000 HVAC units are perfect for commercial and healthcare settings. They effectively eliminate harmful contaminants such as bacteria, mold, viruses, dander, pollen, and dust mite fecal matter. By adding good bacteria into your HVAC system, our units ensure optimal indoor air quality around the clock.
us army corps of engineers

Customer Reviews

Reviews from our Jacksonville Beach, Jacksonville, Orange Park and St Augustine locations.

Get the Best Water Damage Restoration Solution in Florida

Get our A to Z, one-stop water damage restoration services, with our guarantee that you will get the best possible results, while paying less per square foot than you would with any other provider in Florida.

pure maintenance logo
Pure Maintenance Mold Remediation – Jacksonville Beach offers healthy and environmentally conscious homeowners and businesses the most effective mold remediation solutions available on the market at a competitive price.
colabs

Pure Maintenance Mold Remediation - Jacksonville Beach
1514 Roberts Dr Ste 2
Jacksonville Beach, FL 32250

 

(904) 373-1611

[email protected]

 

Follow Us
© 2018- 2026 Pure Maintenance Mold Remediation – Jacksonville Beach. All Rights Reserved.
Privacy Policy
  1. Pure Maintenance inspects your location

  2. We create a mold removal plan

  3. Then email an estimate ( which will contain a link to apply for Wisetack financing)

  4. Once the Wisetack application is complete and approved, Pure Maintenance can execute the mold removal plan

Application takes 5 minutes and you see your options within seconds. No late fees, no prepayment fees, & no origination fees. Checking eligibility does not impact your credit score